http://jcps.bjmu.edu.cn

中国药学(英文版) ›› 2015, Vol. 24 ›› Issue (1): 40-46.DOI: 10.5246/jcps.2015.01.005

• 【研究论文】 • 上一篇    下一篇

离心力辅助硫酸氢氯吡格雷晶型I的制备及其稳定性

敖桔1, 皋海涛2, 唐小平2, 周岚1, 张国庆1*   

  1. 1. 浙江理工大学, 生态染整技术教育部研究中心, 浙江 杭州 310018
    2. 浙江普洛医药科技有限公司, 浙江 金华 322118
  • 收稿日期:2014-06-23 修回日期:2014-08-28 出版日期:2015-01-15 发布日期:2014-09-01
  • 通讯作者: Tel.: 86-571-86843588, Fax: 86-571-86843619
  • 基金资助:

    National Natural Science Foundation of China (Grant No. 51403188), Zhejiang Provincial Natural Science Foundation of China (Grant No. LY13E030004), Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20123318120005).

Centrifugation-assisted preparation and thermostability of Form I clopidogrel hydrogen sulfate

Ju Ao1, Haitao Gao2, Xiaoping Tang2, Lan Zhou1, Guoqing Zhang1*   

  1. 1. Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018, China
    2. Zhejiang Apeloa Medical Technology Co., Ltd., Jinhua 322118, China
  • Received:2014-06-23 Revised:2014-08-28 Online:2015-01-15 Published:2014-09-01
  • Contact: Tel.: 86-571-86843588, Fax: 86-571-86843619
  • Supported by:

    National Natural Science Foundation of China (Grant No. 51403188), Zhejiang Provincial Natural Science Foundation of China (Grant No. LY13E030004), Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20123318120005).

摘要:

硫酸氢氯吡格雷的几个已报道的晶型中, 相对于晶型II, 晶型I的热稳定性较差, 在高温高湿条件下会自发地转变为晶型II, 因而晶型I在生产中难以得到热稳定性好的产品。本文提出利用离心力辅助析晶的方法能生产出高纯度, 稳定性好的晶型I产品。所得到的产品分别用粉末X射线衍射仪(PXRD), 差示扫描热量仪(DSC)和扫描电镜显微镜(SEM)进行了表征。结果显示: 离心力辅助析晶比用传统反溶剂析晶方法得到的晶型I结晶度有明显增加, 晶粒生长得更大更完整。通过长期稳定性实验, 证明新工艺所得到的产品具有较好的热稳定性, 在高温高湿的环境下能长时间储存不变质。

关键词: 硫酸氢氯吡格雷, 多晶体, 离心力辅助析晶, 热稳定性

Abstract:

Of all reported polymorphs of clopidogrel hydrogen sulfate, Form I is difficult to produce and store owing to its poor thermostability. It is reported that Form I can spontaneously transform into Form II at high temperature and humidity. In this study, high purity Form I of clopidogrel hydrogen sulfate with good thermodynamic stability was prepared by a centrifugation-assisted recrystallization technology. The resultant product was characterized by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and scanning electron microscope (SEM). The results showed that the crystallinity and crystallite size of the Form I prepared by the centrifugation-assisted recrystallization method were larger than those obtained by conventional anti-solvent recrystallization methods. Long-term thermostability testing demonstrated that the improved product can keep stable crystal structure even at high temperature and humidity.

Key words: Clopidogrel hydrogen sulfate, Polymorph, Centrifugation-assisted recrystallization, Thermostability

中图分类号: 

Supporting: